55% off!

Rockford Fosgate P2D4-12 – 400W 12″ Punch Stage 2 Dual 4 ohm Subwoofer

$189.99 $84.99

The Rockford Fosgate Punch subwoofers are known for their high-quality performance and the P2D4-12 is no exception to the rule. From its Kevlar-reinforced… (see full description)

Extended Warranty

SKU: P2D4-12 Categories: ,

Description

The Rockford Fosgate Punch subwoofers are known for their high-quality performance and the P2D4-12 is no exception to the rule. From its Kevlar-reinforced paper cones to its VAST technology, the unit delivers on deep resonant bass in a durable package designed to provide years of enjoyment.

Kevlar Fibers

With its 150-400 watts RMS and 800 watts peak power, the unit delivers on standout performance with its bulletproof bass – warm yet hard-hitting bass that compliments any music genre. It is manufactured with a responsive paper cone reinforced by Kevlar fibers and with an oversized rubber surround – truly, combination that results in the subwoofer pushing more air and, thus, giving bigger bass.

Keep in mind that the more air a subwoofer can push, the more power handling it can provide and the bigger the bass sound will be. Indeed, subwoofer enthusiasts like you will rave about the increased cone area by up to 25 percent.

Vertical Attach Surround Technique

The P2D4-12 is also manufactured to withstand the stress of heavy excursion, thanks to its bumped back plate and extended pole piece. You will enjoy deeper bass sounds without the sound bottoming out to ruin your music experience, not to mention that you will less likely encounter complicated installation issues because of Vertical Attach Surround Technique (VAST).

You can even enjoy music for hours on end without the subwoofer giving up its high-quality bass because of the special venting design – the copper-clad aluminium voice coils quickly dissipates the heat build-up especially when the subwoofer is used under high SPL conditions. Without the anodized protection, the subwoofer will have reduced SPL output and even prematurely break down.

The unit works in both sealed and ported enclosure, thus, making it an all-application subwoofer. You even have the opportunity to fine-tune the unit’s mounting position because of its slot mounted frame pattern. The manufacturer recommends pairing the P2D4-12 with a 300-600 watts RMS 2 ohms mono amplifier for best results.


$189.99 $84.99Add to cart

Additional information

Subwoofer Specifications:

See Below

Subwoofer Series

Punch P2 (Rockford Fosgate)

Subwoofer Size

12"

Peak Power Handling

800 watts

RMS Power Handling

400 watts

Voice Coil(s)

Dual

Impedance (Per Voice Coil)

4 ohms

Voice Coil Diameter

2.25"

Frequency Response

27.2 – 250 Hz

Sensitivity

86 dB

Xmax (millimeters)

13.3 mm

Subwoofer Design

Round / Circle

Main Cone Color

Black

Woofer Composition

Kevlar Reinforced Pulp (Paper)

Woofer Surround

Rubber

Subwoofer Grille

No

Re-Cone Kit Available

No

Recommended Enclosure Type

Ported / Vented Sealed

Minimum Sealed Box Volume

0.7 cubic feet

Maximum Sealed Box Volume

1.8 cubic feet

Minimum Ported Box Volume

1.79 cubic feet

Maximum Ported Box Volume

1.79 cubic feet

Top-Mount Depth

6-1/2"

Cutout Diameter

11-1/4"

Shallow Mount Installation

No

Free-Air Resonance (Fs)

27.2 Hz

Equivalent Compliance (Vas)

81.5 liters

Total Speaker Q Value (Qts)

0.54

Electrical Q Value (Qes)

0.59

Electrical Resistance of Voice Coil (Re)

6.40 ohms

Mechanical Q Value (Qms)

6.30

Extended Warranty

Available

Reviews

There are no reviews yet.

Be the first to review “Rockford Fosgate P2D4-12 – 400W 12″ Punch Stage 2 Dual 4 ohm Subwoofer”