The Kenwood KAC-5206 is a 2 channel Class AB amplifier for your car. It has great sound quality and is a reliable performer. It has the type of power that can really boost the sound quality of factory speakers. It is a part of the Kenwood sports series. It is 8” in width, 7” in length and 2” in height. This amplifier weights just 2.8 pounds. When installing the Kenwood KAC-5206 you will need ground wiring and 10 gauge power.
The Kenwood KAC-5206 operates on a voltage of 14.4v. It has a maximum of 400 watts, with a RMS power rating of 4ohms with 60 watts and 2 ohms with 75 watts. Its RMS power rating is bridged and 4 ohms with 150 watts. It can work with two or one channel. It has high level speaker inputs that have the ability to sense a signal and turn on automatically. This means that you don’t have to use a remote.
The Kenwood KAC-5206 is CEA-2006 compliant and it has a 1 year Sonic Electronix warranty. The maximum input gauge size for this amplifier is 10 AWG. It has speaker level inputs and one pair of preamp outputs. It has a low pass built in crossover that directs frequencies to the subwoofers.
The signal to noise ratio of the Kenwood KAC-5206 is 95 dB. In addition, it has a low pass filter of 80 Hz, while the frequency response is between 5Hz to 50 kHz. This gives you the ability to send a bass sound to your subwoofers that is lower than 80Hz.
The Kenwood KAC-5206 has other great features such as 2 Ohms load capability, speaker level input and a triangle indicator. Its cast aluminium heat sink design not only provides protection for the amplifier’s parts, but it also makes it look sleek and sophisticated. It also means that the amplifier will stay cool and will not overheat during your listening experience. Also, this amplifier will turn off if the speaker wires short out or if it gets too hot and malfunctions.